It’s a festive way to decorate AND it’s fun for the kids to count down the days until Halloween!!

It’s SO easy to make too!!

• Design the fonts in your craft cutting software.
• Cut them out
• Paint a board
• Put the vinyl words on the board
• Add a circle with chalkboard vinyl. It’s so easy to use and keep clean!
• Put it out every year!

Here are a few ways I’ve used this sign over the years:

Halloween Bat Porch 2014

Halloween Beadboard Wall and Minky Pumpkins

Halloween Plate Wall and Board 

Halloween Decorating 2015

Are YOU working on any Halloween projects?? 

Leave YOUR ideas in the comments. 

We would love to come over and see YOUR ideas!! 

Have a SPOOKY Day!! 

xoxo

The post Halloween Typography and Countdown Board! appeared first on Tatertots and Jello.

Each month, FloraCraft has sent me a lovely box of foam and craft goodies (and thanks to them for sponsoring the post!).  Inspired by last year’s NOEL letters, I decided to make a Halloween marquee — but do it in an even easier way! You can do this, too — in less than two hours!

You won’t need very many supplies: here’s what you need to do! (I’ve even included a free downloadable template to help!)

I used:

• Two 12×18 sheets for Floracraft foam
• Black spray paint
• Paper from the Home + Made line (woo!)
•  Hot glue
• Zip ties
• Globe string lights (from Target)
• Easy template I made on the computer (download below)
• Stuff you should have lying around like a Sharpie and craft knife
• A refreshing beverage

Here’s what to do!

First, make some easy “3 and 1” templates … or just download mine (right click here and choose “save as” to download the PDF) … and print them out. They’ll print on six sheets of paper that you’ll need to cut out and tape together, like this:

Then lay the paper templates on the foam and mark them with a Sharpie. Make your life easy and line the long edge of the 1 against the right side of one of the foam pieces … and save the templates and extra foam; you’ll need them.

Then, use a knife or FloraCraft StyroCutter Plus (they’re the bomb, really) to cut out the foam:

Now, take the foam outside and carefully spray paint it, keeping the can far away from the foam. While it dries, use the paper templates to cut out some nice scrapbook/decor paper to place on the front of the letters.

Also, trim a rectangular piece from the leftover foam to use as a base. Cover this in whatever paper you like. You can see what I did in the finished pictures, like this:

Now, once everything’s dry, use a ruler and space where you want to put the lights. Mark them with a pencil on the decorative paper. Then, using a sharp craft knife, cut a small X (large enough to accommodate the base of the bulbs) in the paper. Lay the paper on top of the foam pieces and stick a pencil through the foam to show where you’ll want to make holes for the light bases.

Use your styrofoam cutter around each of these foam holes to make enough room for the bases to sit inside the foam. Next, glue the paper to the foam using hot glue or whatever’s convenient.

Then, starting from one end and going to the other, string your lights. Push the base through the back and screw the bulbs in from the front. When you’re done it will look kind of like this:

To clean up the wires, I used zip ties to pull them all tightly together in the back. I also used an extension cord run along the back of the “1” to reach the top plug. It’s a good idea, if you think of it first, to lay out the lights on top of the numbers before you cut in case yours are different than mine. Note that there’s one socket without a bulb that runs behind the base; I covered it with electrical tape.

Then I used four shishkebab skewers to affix the letters to the base … and I was done! This was the easiest of the marquee projects I’ve done. And I love the way it glows, even if it’s hard to photograph!

I’m excited to see what we’ll be making next month!

You can get all kinds of great foam craft ideas by visiting the Make It: Fun site and by following along with FloraCraft on their Pinterest boards and Facebook page, and be sure to check out the other projects the team made this month. Amazing!

Have a Creative Day! 

xoxo

This post sponsored by FloraCraft. See my disclosures.

The post Halloween Foam Marquee Letters! appeared first on Tatertots and Jello.

I made some Christmas Ruffle Trees a couple years ago and ever since then I have been wanting to make some Halloween Ruffle Trees.

I decided that this is the year. And they were so fast and FUN to make!!

(felt Christmas Tree tutorial)

Such a fun way to bring some Whimsical Halloween Color to your decor this year!

And, they are super easy to make too!!

Plus, they are no-sew. All you need is a glue gun. Yay!! (what would I ever do without my trusty glue gun???)

Here’s how to make the Ruffle Trees:

• Take Styrofoam trees. I used four different sizes.
• Then cut a strip of 4 inch wide material from felt or cotton fabric.
• Start at the bottom and wrap the material around the bottom of the tree form. You can either sew a big stitch at the top of the material with your sewing machine, or I just added some gathers as I glued the material onto the bottom of the tree form.
• Once I got to the back of the wreath form, I cut the material.
• Then I added another layer of material over the first layer, covering the top of the first layer. I also added gathers as I glued the second layer on.
• When I reached the top of the tree form, I made sure there was about a 1″ amount of material at the top. After that layer was glued on I put some hot glue at the top and then folded the material over the hot glue to cover the top of the tree.
• After the trees were completed, I took an old window and lined it with some newspaper.
• Then I put it on my mantel and layered a paper pennant I made using some left-over scrapbook paper. I just glued the pennants onto the chain.
• I attached the different chains to the window using some tacks.
• And then I layered the felt Halloween trees onto the mantel.

I love these little trees!!

Thanks for stopping by – have a wonderful day!!

xoxo

The post Make Halloween Ruffle Trees (tutorial) appeared first on Tatertots and Jello.